ProductsEventsServiceFastener guidesESGContact

TJEP 20/25-2 compressor

TJEP 20/25-2 compressor
Item no. 123021
EAN no. 5702551230213
Size (L×W×H) 520 × 430 × 790 mm
Weight 40 kg
Cylinders 2
Horsepower 1.8 kW / 2.5 HP
Power supply 230 volt
Max pressure 10.5 bar / 152 psi
FAD @ 0 bar* 250 litres/min
FAD @ 2.8 bar 180 litres/min
FAD @ 6.2 bar 153 litres/min
Tank 20 litres
Noise (LpA, 4m) 70 dB
Noise (LwA) 95 dB
*Often referred to as "effective air"

TJEP introduces our new compressor, specially developed for handling larger construction tasks.

Key product features

  • Starts at 8.5 bars – ends at 10.5 bars (cut in / cut out)
  • 7,8 Amp
  • 1,450 rpm
  • Oil free
  • Water separator
  • Reduction valve

Do not use extension cables or use only a strong extension cable

Regardless of the compressor type, it is extremely important to use a separate fuse
group. If the compressor will not start, the cause is usually too low a voltage, due to
an extension cable that is too long/thin, other consumers on the same fuse or a cable
reel that is not fully unwound.

We recommend at least the following:

  • Extension cables up to 10 m → 3 x 1.5 mm²
  • Extension cables up to 20 m → 3 x 2.5 mm²
  • Min. 13A dedicated fuse or 400V/230V adapter
Item no.ProductFinish

See the manuals online here:
iPaper Part list

TJEP and UM KGK compressors
Compressors in need of repair must be returned to the dealer or sent, freight paid, to:

Møllevej 9, H2
DK-2990 Nivå
Phone: +45 45 76 17 00

Please do not send compressors to UNIMERCO FASTENING – that will only prolong repair time and involve additional freight costs, since the compressor must be sent on to Nivå.

Thus, if you send a compressor to UNIMERCO FASTENING in Sunds, it will be forwarded to KGK, and there will be a surcharge covering additional freight from Sunds to Nivå.

Warranty repairs are returned carriage-free.

Kyocera Unimerco Fastening A/S
2, Drejervej
7451 Sunds
Tel. +45 97 14 14 40

Did you know that TJEP fuel cells also fit Paslode Impulse products?