ProductsEventsService Technical guidanceContact

TJEP PQZ-64 stapler

TJEP PQZ-64 stapler
Specifications
Item no. 100697
EAN no. 5702551006979
 
Type Pneumatic Nailer
Size (L×W×H) 353 × 106 × 331 mm
Weight 2.86 kg
Air consumption per cycle 2.7 litres
Fasteners
Length 32 - 64 mm
Width PQ: 11.3 mm
PZ: 10.8 mm
Diameter PQ: 1.9 × 1.7 mm
PZ: 1.6 × 1.4 mm
 
Used for
Insulation wire, Flashing of steel , Fermacell, Fermacell Powerpanel, Wind plaster, Lamella floors, Board, Frames, Chipboard

User-friendly tool - for many floor types, boarding, Fermacell, wire etc.

Key product features

  • Adjustable air exhaust
  • Quick removal of 'trapped' staple
  • Top load
  • Incl. special nose for flooring

Guide for selecting compressor
This list is meant as a guide for selecting compressor. The guide is based on an output pressure of 7 bar on the compressor and a maximum of 50 shots per minute. If shots per minute or output pressure is higher, we recommend selecting a larger compressor.

Recommended when using 1 nailer
TJEP 9/20 HP compressorTJEP 9/20 HP compressor
Item no. 123074
EAN no. 5702551230749
TJEP 20/25-2 compressorTJEP 20/25-2 compressor
Item no. 123021
EAN no. 5702551230213
TJEP 20/30-2 compressorTJEP 20/30-2 compressor
Item no. 123052
EAN no. 5702551230527
TJEP 10/250-1 compressorTJEP 10/250-1 compressor
Item no. 123044
EAN no. 5702551230442
TJEP 17/15-2 Silent compressorTJEP 17/15-2 Silent compressor
Item no. 123060
EAN no. 5702551230602
TJEP 24/30-4 Silent compressorTJEP 24/30-4 Silent compressor
Item no. 123064
EAN no. 5702551230640
TJEP 50/30-4 Silent compressorTJEP 50/30-4 Silent compressor
Item no. 123066
EAN no. 5702551230664
Only recommended for low speed (approx. 20 shots per minute)
TJEP 6/160-1 compressorTJEP 6/160-1 compressor
Item no. 123042
EAN no. 5702551230428
[DISCONTINUED]

See the manuals online here:
iPaper Manual
iPaper Safety instruction

Kyocera Unimerco Fastening A/S
2, Drejervej
7451 Sunds
Denmark
Tel. +45 97 14 14 40

Did you know that TJEP has more than 10 GAS nailers?