ProductsNewsEventsService Technical guidanceContact

TJEP KA-1L anchor nailer

TJEP KA-1L anchor nailer
Item no. 100323
EAN no. 5702551003237
Type Pneumatic Nailer
Size (L×W×H) 438 × 112 × 255 mm
Weight 2.04 kg
Air consumption per cycle 3.0 litres
Length 40 - 50 mm
Diameter 4.0 mm
Angle 34°
Used for
Metal connector plates, Wind drag strip

Specially developed for metal connector plates, with many features increasing user-friendliness and safety.

Similar to KA-1 but with a long magazine.

Key product features

  • Takes two strips of nails
  • Drives the nail in with short punches
  • No risk of ricochets
  • Shock-absorbing rubber handle
  • Extra wide rubber edge

Remember daily oiling with TJEP Lubricant

Item no.ProductFinish
837140 TJEP KA 40/40 anchor nails
Galv. 12µ+
837150 TJEP KA 40/50 anchor nails
Galv. 12µ+
837040 TJEP KA 40/40 anchor nails
837340 TJEP KA 40/40 anchor nails
Stainless A4

Guide for selecting compressor
This list is meant as a guide for selecting compressor. The guide is based on an output pressure of 7 bar on the compressor and a maximum of 50 shots per minute. If shots per minute or output pressure is higher, we recommend selecting a larger compressor.

Recommended when using 1 nailer
TJEP 9/20 HP compressorTJEP 9/20 HP compressor
Item no. 123074
EAN no. 5702551230749
TJEP 20/25-2 compressorTJEP 20/25-2 compressor
Item no. 123021
EAN no. 5702551230213
TJEP 20/30-2 compressorTJEP 20/30-2 compressor
Item no. 123052
EAN no. 5702551230527
Only recommended for low speed (approx. 20 shots per minute)
TJEP 10/250-1 compressorTJEP 10/250-1 compressor
Item no. 123044
EAN no. 5702551230442
TJEP 6/10-2 Silent compressorTJEP 6/10-2 Silent compressor
Item no. 123026
EAN no. 5702551230268

See the manuals online here:
iPaper Manual
iPaper Safety instruction

Kyocera Unimerco Fastening A/S
2, Drejervej
7451 Sunds
Tel. +45 97 14 14 40

Did you know that TJEP fuel cells also fit Paslode Impulse products?