MAKITA AF550H HP brad nailer
|Type||High Pressure nailer|
|Size (L×W×H)||228 × 61 × 235 mm|
|Length||15. 19. 25. 30. 35. 38. 40. 45. 50 mm|
Architraves, Architraves, Panelling
We have taken over the distribution of selected MAKITA high pressurre tools and can now present a complete high pressure product range.
Generally, High Pressure distinguishes itself by the combination of high impact and lightweight compact tools. High Pressure allows the nail guns to be smaller, making them considerably lighter than conventional compressed air guns. This reduces the load on your body and thereby improves your daily work.
The high constant air pressure, allows you to use a long hose without any pressure loss making sure you never run out of air – not even when the last nail is shot.
TJEP High Pressure are, above all, effective tools making the job easier due to their compact size, while contributing to a better working environment TJEP High Pressure nailers are characterized by the well-known high TJEP quality, ensuring the craftsman hassle-free operation.
High Pressure brad nailer for panelling, architraves etc.
Key product features
- Safety bracket integrated in nose
- No-mark nose
- Adjustable depth control
- Belt hook
- Rubber handle
- Low weight
|842015||TJEP TF-18 brads 15 mm||Galv.|
|842019||TJEP TF-18 brads 19 mm||Galv.|
|842025||TJEP TF-18 brads 25 mm||Galv.|
|842030||TJEP TF-18 brads 30 mm||Galv.|
|842035||TJEP TF-18 brads 35 mm||Galv.|
|842038||TJEP TF-18 brads 38 mm||Galv.|
|842040||TJEP TF-18 brads 40 mm||Galv.|
|842045||TJEP TF-18 brads 45 mm||Galv.|
|842050||TJEP TF-18 brads 50 mm||Galv.|
|842016||TJEP TF-18 brads 15 mm||Stainless A4|
|842021||TJEP TF-18 brads 19 mm||Stainless A4|
|842026||TJEP TF-18 brads 25 mm||Stainless A4|
|842031||TJEP TF-18 brads 30 mm||Stainless A4|
|842039||TJEP TF-18 brads 38 mm||Stainless A4|
|123084||TJEP HP swivel plug 360°|
|123089||TJEP HP airhose|
|123090||TJEP HP hose reel|
Guide for selecting compressor
This list is meant as a guide for selecting compressor. The guide is based on an output pressure of 7 bar on the compressor and a maximum of 50 shots per minute. If shots per minute or output pressure is higher, we recommend selecting a larger compressor.
|Recommended when using 1 nailer|
|TJEP 9/20 HP compressor|
Item no. 123074
EAN no. 5702551230749
Kyocera Unimerco Fastening A/S
Tel. +45 97 14 14 40