ProductsNewsEventsService Technical guidanceContact

TJEP PC 66 coil nailer

TJEP PC 66 coil nailer
Item no. 100055
EAN no. 5702551000557
Type Pneumatic Nailer
Size (L×W×H) 268 × 128 × 306 mm
Weight 2.05 kg
Air consumption per cycle 2.3 litres
Length 38 - 65 mm
Diameter 2.5 - 3.1 mm
Angle 15°
Used for
Eaves board, Hardieplank, Ivarplank Cedral, Outside siding, Shuttering

For outside siding, panels, pallets, boarding etc.

Very powerful lightweight.

Key product features

  • Single shot / bump fire
  • Adjustable air exhaust
  • Rafter/belt hook
  • Adjustable depth control
  • No-mark nose for tongue and groove
  • Plastic protection cap

Can also be used with CN nails

Guide for selecting compressor
This list is meant as a guide for selecting compressor. The guide is based on an output pressure of 7 bar on the compressor and a maximum of 50 shots per minute. If shots per minute or output pressure is higher, we recommend selecting a larger compressor.

Recommended when using 1 nailer
TJEP 20/25-2 compressorTJEP 20/25-2 compressor
Item no. 123021
EAN no. 5702551230213
TJEP 20/30-2 compressorTJEP 20/30-2 compressor
Item no. 123052
EAN no. 5702551230527
TJEP 10/250-1 compressorTJEP 10/250-1 compressor
Item no. 123044
EAN no. 5702551230442
Only recommended for low speed (approx. 20 shots per minute)
TJEP 6/10-2 Silent compressorTJEP 6/10-2 Silent compressor
Item no. 123026
EAN no. 5702551230268

See the manuals online here:
iPaper Manual
iPaper Safety instruction

Kyocera Unimerco Fastening A/S
2, Drejervej
7451 Sunds
Tel. +45 97 14 14 40

Did you know that TJEP fuel cells also fit Paslode Impulse products?