TJEP PC 65 coil nailer

Specifications | |
Item no. | 100051 |
EAN no. | 5702551000519 |
Type | Pneumatic Nailer |
Size (L×W×H) | 272 × 127 × 317 mm |
Weight | 2.5 kg |
![]() | |
Fasteners | |
Length | 38 - 65 mm |
Diameter | 2.1 - 2.8 mm |
Angle | 15° |
Used for Hardieplank, Outside siding, Ivarplank Cedral, Shuttering, Fascia boards - wood, Eaves board |
For outside siding, panels, pallets, boarding etc.
Very powerful lightweight.
Key product features
- Single shot / bump fire
- Adjustable air exhaust
- Adjustable depth control
- No-mark nose for tongue and groove
- Plastic protection cap
Item no. | Product | Finish |
---|---|---|
112336 | TJEP CN 21/35 ring nails | Bright |
112340 | TJEP CN 21/40 ring nails | Bright |
112346 | TJEP CN 21/45 ring nails | Bright |
112353 | TJEP CN 21/50 ring nails | Bright |
836250 | TJEP CN 25/50 ring nails | Bright |
836255 | TJEP CN 25/55 ring nails | Bright |
836265 | TJEP CN 25/65 ring nails | Bright |
836550 | TJEP CN 25/50 ring nails | Galv. 12µ+ |
836555 | TJEP CN 25/55 ring nails | Galv. 12µ+ |
836560 | TJEP CN 25/60 ring nails | Galv. 12µ+ |
836564 | TJEP CN 25/64 ring nails | Galv. 12µ+ |
836050 | TJEP CN 25/50 ring nails | HDG |
836051 | TJEP CN 25/50 ring nails | HDG |
836065 | TJEP CN 25/65 ring nails | HDG |
836066 | TJEP CN 25/65 ring nails | HDG |
836350 | TJEP CN 25/50 ring nails | Stainless A2 |
836355 | TJEP CN 25/55 ring nails | Stainless A2 |
839038 | TJEP PC 25/38 ring nails | HDG |
839051 | TJEP PC 25/50 ring nails | HDG |
839065 | TJEP PC 25/65 ring nails | HDG |
839066 | TJEP PC 28/65 ring nails | HDG |
839457 | TJEP PC 25/55 ring nails | Stainless A2 |
839451 | TJEP PC 25/51 ring nails | Stainless A4 |
839455 | TJEP PC 25/55 ring nails | Stainless A4 |
839465 | TJEP PC 25/65 ring nails | Stainless A4 |
Item no. | Product |
---|---|
106082 | TJEP Superflex air hose, 1/4" with nipple and coupling |
106095 | TJEP air hose, 8/14 mm poly with nipple and coupling |
106096 | TJEP Hose reel, 8/14 mm poly with nipple and coupling |
106228 | TJEP All season oil |
870969 | No-mark |
871064 | Spare parts set |
Guide for selecting compressor
This list is meant as a guide for selecting compressor. The guide is based on an output pressure of 7 bar on the compressor and a maximum of 50 shots per minute. If shots per minute or output pressure is higher, we recommend selecting a larger compressor.
Recommended when using 1 nailer | |
---|---|
![]() | TJEP 9/20 HP compressor Item no. 123074 EAN no. 5702551230749 |
![]() | TJEP 20/25-2 compressor Item no. 123021 EAN no. 5702551230213 |
![]() | TJEP 20/30-2 compressor Item no. 123052 EAN no. 5702551230527 |
![]() | TJEP 10/250-1 compressor Item no. 123044 EAN no. 5702551230442 |
![]() | TJEP 17/15-2 Silent compressor Item no. 123060 EAN no. 5702551230602 |
Only recommended for low speed (approx. 20 shots per minute) | |
![]() | TJEP 6/10-2 Silent compressor Item no. 123026 EAN no. 5702551230268 |
![]() | TJEP 8/10-2 Silent compressor Item no. 123056 EAN no. 5702551230565 |
See the manuals online here: |
---|
Kyocera Unimerco Fastening A/S
2, Drejervej
7451 Sunds
Denmark
Tel. +45 97 14 14 40