ProductsEventsServiceFastener guidesESGContact

TJEP TW-16/38 stapler [DISCONTINUED]

TJEP TW-16/38 stapler
Specifications
Item no. 100696
EAN no. 5702551006962
 
Type Pneumatic Nailer
Size (L×W×H) 375 × 88 × 270 mm
Weight 3.07 kg
Air consumption per cycle 1.5 litres
Fasteners
Length 19 - 38 mm
Width 26.6 mm
Diameter 1.6 × 1.4 mm
 
Used for
Building paper

TJEP TW-16/38 stapler has been discontinued and replaced by:
TJEP TW-16/38 LW stapler


Guide for selecting compressor
This list is meant as a guide for selecting compressor. The guide is based on an output pressure of 7 bar on the compressor and a maximum of 50 shots per minute. If shots per minute or output pressure is higher, we recommend selecting a larger compressor.

Recommended when using 1 nailer
TJEP 10/250-1 compressorTJEP 10/250-1 compressor
Item no. 123044
EAN no. 5702551230442
[DISCONTINUED]
TJEP 20/30-2 compressorTJEP 20/30-2 compressor
Item no. 123052
EAN no. 5702551230527
[DISCONTINUED]
Only recommended for low speed (approx. 20 shots per minute)
TJEP 6/160-1 compressorTJEP 6/160-1 compressor
Item no. 123042
EAN no. 5702551230428
[DISCONTINUED]
TJEP 6/10-2 Silent compressorTJEP 6/10-2 Silent compressor
Item no. 123026
EAN no. 5702551230268
[DISCONTINUED]

See the manuals online here:
iPaper Manual
iPaper Safety and operation instructions

Kyocera Unimerco Fastening A/S
2, Drejervej
7451 Sunds
Denmark
Tel. +45 97 14 14 40

Did you know that TJEP fuel cells also fit Paslode Impulse products?